No Snmp View - Siemens SCALANCE XC-200 Configuration Manual

Network protocols
7.5 SNMP
7.5.2.23

no snmp view

Description
With this command, you delete an SNMP view.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
no snmp view <ViewName> <OIDTree>
The parameters have the following meaning:
Parameter
ViewName
OIDTree
Result
The SNMP view is deleted.
Further notes
You configure a view with the snmp view command.
You display the configured SNMP tree views with the show snmp viewtree command.
350
Description
Name of the view
Object ID
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Range of values / note
max. 32 characters
Path information of the MIB tree
Configuration Manual, 07/2017, C79000-G8976-C361-06