Show Spanning-Tree Mst; Show Spanning-Tree Mst Configuration - Siemens SCALANCE XC-200 Configuration Manual

Simatic net command line interface industrial ethernet switches

Hide thumbs Also See for SCALANCE XC-200:

Table of Contents

The settings for Layer 2 Gateway Port (L2GP) are displayed.

show spanning-tree mst

This command shows various settings of the spanning tree configuration specific to a Common

Internal Spanning Tree (CIST) instance or a selected instance of the Multiple Spanning Tree

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

cli> or cli#

Call up the command with one of the following parameter assignments:

show spanning-tree mst[<instance-id(1-64|4094)>][detail]

The parameters have the following meaning:

The settings for the spanning tree configuration are displayed.

Further notes

You display the general settings for the Spanning Tree Protocol with the show spanning-

tree command.

This command shows various settings for an instance of the Multiple Spanning Tree Protocol.

SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface

Configuration Manual, 07/2017, C79000-G8976-C361-06

Number of the instance or range of in‐

stances whose settings are displayed

Shows detailed information about the

selected interface

Network structures

6.3 Spanning Tree

Range of values / note

Show Quick Links

Table of Contents