Name; No Name - Siemens SCALANCE XM-400 Configuration Manual

Network structures
6.1 VLAN
Further notes
It is possible to remove individual ports from a VLAN configuration without needing to rewrite
the entire configuration (in contrast to creating ports because it is not possible to add
individual ports later).
You display details of the function with the
You configure the setting with the
6.1.4.3

name

Description
With this command, you assign a name to the VLAN.
Requirement
You are in the VLAN Configuration mode.
The command prompt is as follows:
cli(config-vlan-$$$)#
Syntax
Call up the command with the following parameters:
name <vlan-name>
The parameter has the following meaning:
Parameter
vlan-name
Result
The VLAN is assigned a name.
Further notes
You delete name assignment for a VLAN with the
6.1.4.4

no name

Description
With this command, you delete the name assignment for a VLAN.
202
show vlan
command.
ports
Description
Name that will be assigned to the
VLAN
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
command.
Range of values / note
max. 32 characters
command.
no name
Configuration Manual, 11/2015, C79000-G8976-C252-10