Chrysler 2005 Crossfire SRT6 Service Manual page 472

5 - 306 BRAKES - ABS ELECTRICAL DIAGNOSTICS
1331-BAS SOLENOID VALVE - RESISTANCE TOO HIGH (CONTINUED)
6.
MEASURE THE RESISTANCE OF THE BAS SOLENOID VALVE 5-VOLT SUPPLY CIRCUIT
Turn the ignition off.
Measure the resistance between ground and the BAS Solenoid Valve
5-Volt Supply circuit.
Is the resistance above 100k ohms?
Yes >> Go to 7
No >> Repair the BAS Solenoid Valve 5-Volt Supply circuit for a
short to ground.
Perform ABS VERIFICATION TEST.
7.
MEASURE THE RESISTANCE OF THE BAS SOLENOID VALVE CONTROL CIRCUIT
With the ignition off.
Measure the resistance between ground and the BAS Solenoid Valve
Control circuit.
Is the resistance above 100k ohms?
Yes >> Go to 8
No >> Repair the BAS Solenoid Valve Control circuit for a short
to ground.
Perform ABS VERIFICATION TEST.
ZH