Format Thin-Pro-Pool - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.1 Thin Provisioning Pool Management > format thin-pro-pool

format thin-pro-pool

This command will format the Thin provisioning pool(s).
■
Syntax
format thin-pro-pool {-pool-number
■ Parameter
-pool-number
or
-pool-name
-mode
■ Example(s)
The following example formats all the area of Thin provisioning pool#01:
CLI> format thin-pro-pool -pool-number 01 -mode all
The following example formats the unformatted area of the Thin provisioning pool named "TPP05":
CLI> format thin-pro-pool -pool-name TPP05 -mode unformatted
pool_number
This parameter specifies the Thin provisioning pool identifiers. One or more Thin provisioning
pool identifiers can be specified. For details, refer to
(page 20).
This parameter specifies the range of the format.
all All the areas are formatted (all of the data is deleted).
unformatted Unformatted areas are formatted. When there are no unformatted areas, the
command ends normally (no action from the command is performed).
When the "-mode all" parameter is specified to format all of the areas, all of the existing data is
deleted. Normally, the "-mode unformatted" parameter is used to format only unformatted
areas.
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
pool_name
| -pool-name
"1.2.5 Thin Provisioning Pool Syntax"
85
} -mode {all|unformatted}
P2X0-1030-09ENZ0