Show Date - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 4 Function/System Settings and Display
4.4 Miscellaneous > show date

show date

This command displays the date and time of the system.
■
Syntax
show date
■ Parameter
No parameters.
■ Output
# 2008-12-31 00:00:03 GMT+03:00 (Nairobi, Moscow)
date
# DST [ON] 06-01 02:00 - 09-30 02:00
dst : from 2:00 AM on June 1 to 2:00 AM on September 30
# 2008-01-01 23:55:00 GMT+01:00 (Paris, Madrid, Stockholm)
date
DST [ON] 03-last-Sun 02:00 - 10-last-Sun 02:00
dst : from 2:00 AM on March last Saturday
to 2:00 on October last Saturday
■
Example(s)
The following example displays the system date and time:
CLI> show date
2008-10-01 10:59:59 GMT+09:00 (Tokyo, Osaka, Kyoto, Fukuoka, Sapporo)
DST [OFF]
CLI> show date
2008-12-31 00:00:03 GMT+03:00 (Nairobi, Moscow)
DST [ON] 06-01 02:00 - 09-30 02:00
CLI> show date
2008-01-01 23:55:00 GMT+01:00 (Paris, Madrid, Stockholm)
DST [ON] 03-last-Sun 01:00 - 10-last-Sun 01:00
time timezone
time timezone dst
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
558
P2X0-1030-09ENZ0