Show Port-Error - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 5 Information Settings and Display
5.3 Maintenance > show port-error

show port-error

This command displays the details of disk errors. This command displays the error details of the SAS expander
ports (the interfaces linking controllers and disk enclosures). There are three ports for each expander module
and four PHYs for each port. For SAS, there are also ports and PHYs for the host interfaces.
■ Syntax
show port-error
■ Parameter
No parameters.
■ Output
# CLI>show port-error
# Expander
#
# FE EXP#0
A
A: Expander Type
B: Port Number
C: PHY Number
D: Link Status
E: Invalid Dword Count
F: Disparity Error Count
G: Loss of Dword Synchronization Count
H: PHY Reset Problem Count
Port PHY Status
Port#0 PHY#0 Link Up
B C D
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
Invalid Disparity Loss of Dword
Dword Error Synchronization
1 0
E F G
652
PHY Reset
Problem
0 1
H
P2X0-1030-09ENZ0