Show Host-Groups - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show host-groups

show host-groups

This command displays existing host groups.
■
Syntax
show host-groups
[-host-group-number
[-host-number
■ Parameter
-host-group-number
or
-host-group-name
-all
-host-number
or
-host-name
■ Output
When the parameter is omitted, a summary of all the existing host groups is displayed.
# Host Group
# No. Name
# 0 hg
# 1 FCoE
# 2 iscsi
A B
A Host group number
B Host group name
C Host response number
D Host response name
E Host type
host_group_numbers
host_numbers | -host-name
Optional. This parameter specifies the host group identifiers that will be displayed in detail.
One or more parameters can be specified. If omitted, a summary of all the existing host groups
will be displayed. For details, refer to
Optional. When this parameter is specified, the details of all the existing host groups are
displayed.
Optional. This parameter specifies the host that is included in the host group that is to be
displayed in detail. One or more parameters can be specified. For details, refer to
Group Syntax" (page 26).
Host Response
No. Name
250 Solaris MPxIO
250 Solaris MPxIO
254 AIX Single Path
C D
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
host_group_names
| -host-group-name
host_names ]
"1.2.16 Host Group Syntax" (page
Host Type
FC/FCoE
FC/FCoE
iSCSI
E
323
| -all]
26).
"1.2.16 Host
P2X0-1030-09ENZ0