Create Host-Wwn-Name - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > create host-wwn-name

create host-wwn-name

This command registers the host alias that corresponds to the WWN (World Wide Name) that identifies FC or
FCoE type HBAs (Host Bus Adapters). Only one WWN can be registered at the same time. The maximum
number of available definitions depends on the number of available host interface ports and the model type.
This enables the alias to be used instead of the numeric WWN when mapping volumes to host servers.
■ Syntax
create host-wwn-name -wwn
[-host-response-number
[-host-group-number
-new-host-group-name
■ Parameter
-wwn
-name
-host-response-number
or
-host-response-name
-host-group-number
or
-host-group-name
-new-host-group-name
■
Example(s)
The following example registers host alias "HBA1". The WWN
is "e000000000e0e000" and host response #1 is assigned:
CLI> create host-wwn-name -wwn e000000000e0e000 -name HBA1 -host-response-number 1
wwn
-name
host_response_number
host_group_number
new_host_group_name
This parameter specifies the WWN that corresponds to an HBA. The WWN is a 16-byte
hexadecimal number.
Example: -wwn 40000000abc80e38
This parameter specifies the host WWN alias. For details, refer to
(page 20).
Optional. This parameter specifies the host response identifier. Two or more parameters
cannot be specified at the same time. For details, refer to
24). If omitted, the existing setting is not changed.
Optional. This parameter specifies the host group number or the host group name. Only one
host group can be specified at the same time. For details, refer to
(page 26).
Optional. This parameter specifies a new host group name. Only one host group can be
specified at the same time. For details, refer to
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
name
| -host-response-name
host_group_name
| -host-group-name
]
"1.2.16 Host Group Syntax" (page
227
host_response_name
]
|
"1.2.4 Alias Name Syntax"
"1.2.12 Host Response Syntax" (page
"1.2.16 Host Group Syntax"
26).
P2X0-1030-09ENZ0