Show Event-Notification - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 4 Function/System Settings and Display
4.3 Network Management > show event-notification

show event-notification

This command displays the parameters that have been set for event notification.
■
Syntax
show event-notification
■ Parameter
No parameters.
■ Output
# [Severity: Error Level]
# Parts Error
# . . .
# Disk Error
A: It indicates whether it is notified by
B: It indicates whether it is notified by SNMP trap, or not.
C: It indicates whether it is notified by Host sense, or not. Also, it means host sense as OPMSG.
D: It indicates whether it is notified by REMCS, or not.
E: It indicates whether it is notified by syslog, or not.
F: It indicates whether it is notified by AIS Connect, or not.
G: It indicates conditions when there was no hot spare in the system.
H: It indicates conditions when there was no hot spare in the system. Also, it means host sense as OPMSG.
E-mail SNMP Host
Notify Notify Notify(OPMSG)
A B C
Notify(HS<0) Notify(HS<0) Notify(HS<0,OPMSG) -
G H
E-mail
, or not.
522
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
REMCS syslog AIS Connect
- Do not notify Notify
D E F
Do not notify Notify(HS<0)
P2X0-1030-09ENZ0