Fujitsu ETERNUS DX80 S2 Cli User's Manual page 702

Appendix A Error Messages
Message
number
E6010
E7100
E7101
E7102
E7103
E7104
E7105
E7106
E7107
E7108
E7109
E7110
E7111
E7112
E7113
E7114
Current cache page size is over specified cache limit size.
The cache capacity that is being used by the Write process has exceeded the specified cache capacity
limit.
The specified Flexible Tier Pool has Flexible Tier Volume(s) which is balancing.
The specified Flexible Tier Pool has Flexible Tier Volumes that are being balanced.
There is no free OLU or SLU to create destination LUN.
There is no free volume to create a destination LUN.
It is in the process of deleting source Thin Provisioning Volume internally which is done after migration.
A source Thin Provisioning Volume is internally being deleted after migration.
Number of migration sessions has reached the system limit.
The number of migration sessions has reached the system limit.
The source LUN has already using for migrated.
The source LUN is already being used for a migration session.
The source LUN has already using at other session.
The source LUN is already being used for another session.
The resource in the internal is depleted.
All of the internal resources are already been used.
State of source volume or destination volume is error.
An error has occurred in the source volume or the destination volume.
The specified volume don't have migration session during startup.
A migration session is not running for the specified volume.
The specified volume is currently configured with Bind-in-Cache extent.
Bind-in-Cache is set for the specified volume.
Logical capacity which can be migrate is over.
The logical capacity that can be migrated exceeds the maximum capacity.
Physical capacity of destination pool is error.
The physical capacity of the destination pool is abnormal.
There is not enough free space to create the pool in the device.
There is not enough free space to create the pool in the ETERNUS DX Disk storage system.
Balancing cannot be executed because there is not enough free space in the pool.
Balancing cannot be executed because there is not enough free space in the pool.
Balancing cannot be executed because the device is in error state.
Balancing cannot be executed because the ETERNUS DX Disk storage system is in error state.
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
Message
Countermeasure for the error
702
P2X0-1030-09ENZ0