Delete Affinity-Group - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > delete affinity-group

delete affinity-group

This command deletes the specified affinity group(s), or releases a definition from the specified affinity group.
■
Syntax
delete affinity-group {-ag-number
■ Parameter
-ag-number
or
-ag-name
-lun
■ Example(s)
The following example only deletes affinity group #1:
CLI> delete affinity-group
The following example deletes affinity groups #1 and #2:
CLI> delete affinity-group
The following example only releases the definition of LUN #1 associated with the affinity group named
"AGP001":
CLI> delete affinity-group
The following example only releases the definitions of LUN #1 and #2 associated with the affinity groups
named "AGP001":
CLI> delete affinity-group
The following example respectively releases the definitions of LUN #1 and #2 that are associated with the
affinity group named "AGP001" and "AGP002":
CLI> delete affinity-group
ag_numbers
This parameter specifies the affinity group identifiers to be deleted. One or more parameters
can be specified at the same time. For details, refer to
By specifying the "-lun" parameter, one or more definitions included in the affinity group can
be deleted. In this case, the Affinity group is not deleted.
Optional. This parameter specifies the LUNs that will be removed from the affinity group
definitions. Two or more parameters can be specified by separating them with a comma, a
hyphen or both. If omitted, the specified affinity groups are deleted.
Example: -lun 1,2 -lun 1-3 -lun 1-3.5
-ag-number 1
-ag-number 1,2
-ag-name AGP001 -lun 1
-ag-name AGP001 -lun 1,2
-ag-name AGP001,AGP002 -lun 1,2
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
ag_names
| -ag-name
"1.2.11 Affinity Group Syntax" (page
257
luns
} [-lun ]
P2X0-1030-09ENZ0
24).