Fujitsu ETERNUS DX80 S2 Cli User's Manual page 301

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > set host-sense
-converted-sk
-converted-asc
-converted-ascq
■ Example(s)
The following example sets the preset host sense for 'Linux' to host response #1:
CLI> set host-sense -host-response-number 1 -preset linux
In the following example, the host sense that is set to host response #1 reverts to the default value:
CLI> set host-sense -host-response-number 1 -preset no-conversion
Optional. This parameter specifies the sense key that corresponds to the sense of the
conversion destination. This parameter can only be specified when "-preset custom" is
selected. This parameter must be specified by using either a hexadecimal number or the
wildcard (*).
Optional. This parameter specifies the sense code, which is an additional sense code that
corresponds to the sense of the conversion destination, This parameter can only be specified
when "-preset custom" is selected. This parameter must be specified by using either a
hexadecimal number or the wildcard (*).
Optional. This parameter specifies the sub sense code, which is an additional sense code
qualifier that corresponds to the sense of the conversion destination. This parameter can only
be specified when "-preset custom" is selected. This parameter must be specified by using
either a hexadecimal number or the wildcard (*).
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
301
P2X0-1030-09ENZ0