Show Host-Port-Mode - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 4 Function/System Settings and Display
4.2 Advanced Copy Management > show host-port-mode

show host-port-mode

This command displays operation mode that is set to each host interface port.
■
Syntax
show host-port-mode
■ Parameter
No parameters.
■ Output
#
# CM#0 CA#0 Port#0
A
A: A location of a host interface port
B: Operation mode for a host interface port
■ Example(s)
The following example displays operation mode that is set to all the host interface ports on a system:
CLI> show host-port-mode
CM#0 CA#0 Port#0
CM#0 CA#0 Port#1
CM#0 CA#1 Port#0
CM#0 CA#1 Port#1
CM#1 CA#0 Port#0
CM#1 CA#0 Port#1
Port Mode
RA
B
Port Mode
RA
OCLINK
CA
CA
RFCF-RA
FCLINK
421
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0