Show Host-Iscsi-Names - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show host-iscsi-names

show host-iscsi-names

This command displays a list of the iSCSI hosts registered in the system. When iSCSI host identifiers are
specified, iSCSI host details of the specified iSCSI host identifiers are displayed:
■ Syntax
show host-iscsi-names [-host-number
■ Parameter
-host-number
or
-host-name
■ Output
When the iSCSI host identifier parameter is omitted, then an iSCSI host summary list for all the iSCSI host
identifiers is displayed:
# Host
# No. Name
# 1 HBA-ISCSI-001
A B
A: Host number
B: Host nickname
C: Assigned the host response number
D: Assigned the host response name
E: IP address which corresponds to a HBA. If the IP address is not specified, the * mark is displayed. When the IP
address format is IPv4, "*(IPv4)" is displayed. When the IP address format is IPv6, "*(IPv6)" is displayed.
F: iSCSI host name which corresponds to a HBA
G: CmdSN Count
When iSCSI host identifiers are specified, iSCSI host details of the specified iSCSI host identifiers are
displayed:
# Host No.
# Host Name
# iSCSI Name
# Alias Name
# IP Address
# Chap User Name
# Host Response No.
# Host Response Name
# CmdSN Count
host_numbers
Optional. This parameter specifies which iSCSI host identifier(s) details are to be displayed.
One or more identifiers can be specified at the same time. If omitted, a summary list is
displayed. For details, refer to
Host Response IP Address
No. Name
1 HP01 192.168.1.1
C D E
1
HBA1
iqn.1991-05.com.microsoft
IQN-DXL1
10.1.1.1
User01
0
Default
Unlimited
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
host_names
| -host-name
"1.2.10 Host Syntax" (page
iSCSI Name
iqn.1991-05.com.microsoft
F
247
]
23).
CmdSN Count
80
G
P2X0-1030-09ENZ0