Delete Lun-Group - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > delete lun-group

delete lun-group

This command deletes the specified LUN groups, or releases a definition from the specified LUN group.
■
Syntax
delete lun-group {-lg-number
■ Parameter
-lg-number
or
-lg-name
-lun
■ Example(s)
The following example only deletes LUN group #1:
CLI> delete lun-group
The following example deletes LUN groups #1 and #2:
CLI> delete lun-group
The following example only releases the definition of LUN #1 associated with the LUN group named
"AGP001":
CLI> delete lun-group
The following example only releases the definitions of LUN #1 and #2 associated with the LUN groups
named "AGP001":
CLI> delete lun-group
The following example respectively releases the definitions of LUN #1 and #2 that are associated with the
LUN group named "AGP001" and "AGP002":
CLI> delete lun-group
lg_numbers
This parameter specifies the LUN group identifies to be deleted. One or more parameters
can be specified at the same time. For details, refer to
24). By specifying the "-lun" parameter, one or more definitions included in the LUN group
can be deleted. In this case, the LUN group is not deleted.
Optional. This parameter specifies the LUNs that will be removed from the LUN group
definitions. Two or more parameters can be specified by separating them with a comma, a
hyphen, or both. If omitted, the specified LUN groups are deleted.
Example: -lun 1,2 -lun 1-3 -lun 1-3,5
-lg-number 1
-lg-number 1,2
-lg-name AGP001 -lun 1
-lg-name AGP001 -lun 1,2
-lg-name AGP001,AGP002 -lun 1,2
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
lg_names
| -lg-name } [-lun
266
luns
]
"1.2.11 Affinity Group Syntax" (page
P2X0-1030-09ENZ0