Export Ssl-Certificate-Request - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 4 Function/System Settings and Display
4.3 Network Management > export ssl-certificate-request

export ssl-certificate-request

This command exports the CSR (Certificate Signing Request) file and server key file that were generated to
send to the certificate provider.
■ Syntax
export ssl-certificate-request -port {maintenance | remote | fst} -server
-user login_user_account
[-key-length {1024 | 2048 | 4096}] -country-name
-state-province-name
-organization-name
-common-name
[-indicator {enable | disable }]
■ Parameter
-port
-server
-user
[-csr-filename
state_province_name
organization_name
common_name
[-subject-alt-name
This parameter specifies which Ethernet port is used to connect to the FTP server.
For details, refer to "1.11 Note for Specifying FTP Server" (page
maintenance
MNT port
remote RMT port
fst FST port (ETERNUS DX410 S2/DX440 S2 only)
This parameter specifies the name of the FTP server on which the CSR/key file are loaded. The
server name should be in IPv4 standard notation (a base 256 "d.d.d.d" string) format, IPv6
address format or a fully qualified domain name (FQDN).
Example: -server 192.168.1.20
Example: -server fd80::abd0:223:ad
Example: -server foo.bar
This parameter specifies the user account name for access to the FTP server. This command
displays an FTP server password prompt.
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
csr-filename ] [-key-filename
country_name
locality_name
-locality-name
organization_unit_name
-organization-unit-name
altname1 alitname2
,
536
server_name
key-filename ]
...]
31).
P2X0-1030-09ENZ0