Fujitsu ETERNUS DX80 S2 Cli User's Manual page 274
Disk storage systems
Hide thumbs
Also See for ETERNUS DX80 S2:
- User manual (186 pages) ,
- User's manual & installation instructions (147 pages) ,
- Overview (97 pages)
Table of Contents
Advertisement
Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > set host-affinity
-ag-number
or
-ag-name
-lg-number
or
-lg-name
-host-group-number
or
-host-group-name
or
-host-response-number
or
-host-response-name
The available combinations for optional parameters are shown below.
Parameter
-port
-ag-number (-lg-number)
-ag-name (-lg-name)
-host-number
-host-name
-port-group-number
-port-group-name
-host-group-number
-host-group-name
-host-response-number
-host-response-name
No: Not available R: Required Yes: Available (the options can be omitted) *: Either one of these options
must be specified
*1:
Both of the parameter combinations can be omitted when a path is set in a host affinity that is already set with a
port group. Therefore, an error occurs when an affinity group is not specified and the port group and the host group
are not associated with the host affinity setting.
*2:
The "-ag-number" parameter or the "-ag-name" parameter cannot be specified when LUN mapping is already set
with a port group and the host response for LUN mapping will be changed. Therefore, a host response must be
specified when an affinity group is not specified ("Default" must be specified to set the default host response).
(When this parameter is used with the "-port-group-number" or the "-port-group-name"
parameter) Optional. This parameter specifies the affinity group identifiers that will be
associated. Only one parameter can be specified at the same time. For details, refer to
Affinity Group Syntax" (page
(When this parameter is used with the "-port-group-number" or the "-port-group-name"
parameter) Optional. This parameter specifies the LUN group identifiers that will be
associated. Only one parameter can be specified at the same time. For details, refer to
Affinity Group Syntax" (page
This parameter specifies the host group number, the host group name, the host response
number, or the host response name. Only one host group or host response can be specified at
the same time. For details, refer to
Group Syntax" (page
26).
—
R
—
R
No
R
R
No
No
No
No
No
No
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
24).
24).
"1.2.12 Host Response Syntax" (page 24)
* (*1)
*
No
No
*
No
—
*
No
* (*1)
—
No
No
* (*1)
No
—
No
*
No
No
*
No
No
No
*
No
No
*
No
No
* (*2)
No
No
* (*2)
No
No
274
and
"1.2.16 Host
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
—
No
*
—
*
*
—
No
*
No
—
*
No
No
*
No
No
P2X0-1030-09ENZ0
"1.2.11
"1.2.11
No
No
No
No
No
No
No
No
No
No
*
*
No
No
No
No
—
No
No
—
- Quick Links:
- Accessing Cli
Hide quick links:
Advertisement
Table of Contents
