Fujitsu ETERNUS DX80 S2 Cli User's Manual page 345

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > set lu-qos-schedule
-event-to
■
Example(s)
The following example creates an QoS schedule. The QoS schedule number is 0. The QoS schedule will apply
every day from 06:00 to 18:00:
CLI> set lu-qos-schedule -schedule-number 0 -event-type every-day -event-from 0600 -event-to 1800
The following example deletes the QoS schedule:
CLI> set lu-qos-schedule -schedule-number 0 -event-type none
Optional. This parameter specifies that the QoS schedule will end at a specific time. The format
is "hhmm". "hh" is the ending hour (00 – 23) and "mm" is the ending minute (00, 10, 20, 30,
40, or 50).
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
345
P2X0-1030-09ENZ0