Show Community-Profile - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 4 Function/System Settings and Display
4.3 Network Management > show community-profile

show community-profile

This command displays a list of all the registered SNMP community profiles.
■
Syntax
show community-profile [-community
■ Parameter
-community
■ Output
# No. Name
# 1 "community1"
A B
# <Manager list>
# No. IP address
# 1 192.168.0.10
# 2 17.20.56.101
# 3 10.0.0.1
# 4 172.101.235.221
# 5 192.168.0.11
# 6 144.72.48.100
# 7 192.168.100.1
# 8 192.168.100.2
# 9 192.168.100.3
# 10 192.168.100.4
E F
A: Community number
B: Community name
C: Manager number list
D: MIB view name
E: Manager number
F: Manager IP address
■ Example(s)
The following example displays a list of all the registered SNMP community profiles:
CLI> show community-profile
No. Name
1 "community1000000000000000000000"
2 "community2"
3 "community3.141592"
4 "c4"
community_name
Optional. This parameter specifies the SNMP community name of the profiles to be
displayed. Only one community name can be specified at the same time.
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
]
Manager No.
1, 2, 3, 4, 5,
C
Manager No.
1, 2, 3, 4, 5,
2
1, 4,
2, 3, 4, 5,
496
MIB View
6, 7, 8, 9, 10 "view1"
D
MIB View
6, 7, 8, 9, 10 "view1"
6, "view3"
7, 8, 9 "view4"
"viewC4"
P2X0-1030-09ENZ0