Show Smi-S - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 4 Function/System Settings and Display
4.3 Network Management > show smi-s

show smi-s

This command displays whether the SMI-S functions are enabled or disabled.
■
Syntax
show smi-s
■ Parameter
No parameters.
■ Output
# Current
# After the next power cycle [Enable]
A: It shows whether all of the SMI-S functions are currently enabled.
B: It shows whether all of the SMI-S functions will be enabled after the next power cycle.
■ Example(s)
The following example displays the SMI-S functions:
CLI> show smi-s
S
Current
After the next power cycle [Enable]
[Enable]
A
B
[Enable]
529
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0