Import Ssl-Certificate - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 4 Function/System Settings and Display
4.3 Network Management > import ssl-certificate

import ssl-certificate

This command imports and registers the SSL server certificate that is signed by the certificate provider.
■
Syntax
import ssl-certificate -port {maintenance | remote| fst} -server
login_user_account
-user
[-key-filename
■ Parameter
-port
-server
-user
-cert-filename
-key-filename
-indicator
■ Example(s)
The following example imports and registers the signed certificate and the server key:
CLI> import ssl-certificate -port maintenance -server ftp.example.com -user cli-user -cert-filename
server.cert -key-filename server.key
[-cert-filename
key-filename ] [-indicator {enable | disable}]
This parameter specifies which Ethernet port is used to connect to the FTP server.
For further information, refer to
maintenance
MNT port
remote RMT port
fst FST port (ETERNUS DX410 S2/DX440 S2 only)
This parameter specifies the name of the FTP server on which the certificate and key file are
stored. The server name should be in IPv4 standard notation (a base 256 "d.d.d.d" string)
format, IPv6 address format or a fully qualified domain name (FQDN).
Example: -server 192.168.1.20
Example: -server fd80::abd0:223:ad
Example: -server foo.bar
This parameter specifies a user account name for access to the FTP server. This command
displays an FTP server password prompt.
Optional. This parameter specifies the filename to load the certificate file. If omitted,
"server.crt" (default file) is used. If the same file already exists, it is overwritten.
Optional. This parameter specifies the filename to load the key file. If omitted, "server.key"
(default file) is used. If the same file already exists, it is overwritten.
Optional. This parameter specifies whether the progress indicator is displayed. If omitted, the
progress indicator is displayed.
enable Progress indicator is displayed.
disable Progress indicator is not displayed.
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
server_name
cert-filename
]
"1.11 Note for Specifying FTP Server" (page
540
31).
P2X0-1030-09ENZ0