Fujitsu ETERNUS DX80 S2 Cli User's Manual page 426

Chapter 4 Function/System Settings and Display
4.2 Advanced Copy Management > show rec-path
■ Example(s)
The following example displays a list of remote storage systems connected to this system. In this case, an
error in the path information status is indicated with a "*" mark.
CLI> show rec-path
Remote Storage System
E Remote Box ID
00DXL#########ET06F21AUABCPJ000002######
* 00DXL#########ET06F21AUABCPJ000004######
00DXL#########ET06F21AUABCPJ000006######
The following example displays the path information details for the specified storage system. Note that if
spaces or hash mark (#) characters are used, the Box ID must be specified with double quotations:
CLI> show rec-path -remote-boxid "00DXL#########ET06F21AUABCPJ000000######"
Storage Information
Local Box ID (Current Storage System) 00DXL#########ET06F21AUABCPJ000001######
Remote Box ID
Line Information
Path Type
Effective Line Speed
Round Trip Time
Current Multiplicity
Recommended Multiplicity
Priority Level
Copy Schedule Mode
Path Information (to Remote Storage System)
Local Port
CM#0 CA#0 Port#0
CA#0 Port#1
CA#0 Port#2
CM#1 CA#1 Port#2
CM#1 CA#2 Port#0
Error detail description(s)
R: The copy path between the local device and remote device is in unstable status.
For example, link-down repeatedly occurs in a certain period of time or communication fails.
B: The resolution settings are different between the local and remote devices.
T: The error occurs in the FC-RA port or iSCSI-RA port on the remote device.
C: The error occurs in the cable.
I: The error occurs in the FC-RA port or iSCSI-RA port on the local device.
The following example displays the path information details for the specified storage system. In this case,
iSCSI-RA is used:
CLI> show rec-path -remote-boxid "00DXL#########ET06F21AUABCPJ000000######"
Storage Information
Local Box ID (Current Storage System) 00DXL#########ET06F21AUABCPJ000001######
Remote Box ID
Line Information
Path Type
Effective Line Speed
Round Trip Time
Current Multiplicity
Recommended Multiplicity
Priority Level
Copy Schedule Mode
Path Information (to Remote Storage System)
Local Port
Local Port
CM#0 CA#2 Port#1
CM#1 CA#1 Port#0
CA#2 Port#0
CA#2 Port#0
CA#2 Port#1
(192.168.2.66)
Error detail description(s)
B: The resolution settings are different between the local and remote devices.
T: The error occurs in the FC-RA port or iSCSI-RA port on the remote device.
C: The error occurs in the cable.
S: The error occurs in the switch or switch settings.
I: The error occurs in the FC-RA port or iSCSI-RA port on the local device.
Path Type
Direct
Switched
Switched
00DXL#########ET06F21AUABCPJ000000######
Switched
10 (Mbit/s)
12 (ms)
Auto
3
-
Session balancing
Status Remote Port WWN / iSCSI Name (IP Address)
Normal 500000E0D0C40005
Error [I T ] 500000E0D0C40006
Error [T ] 500000E0D0C40087
Normal 500000E0D0C40086
Error [R ] 500000E0D0C40007
Error [C ] 500000E0D0C40006
Error [B ] 500000E0D0C40085
00DXL#########ET06F21AUABCPJ000000######
Switched
10 (Mbit/s)
12 (ms)
Auto
3
-
Destination RAID Group balancing
Remote Port Information
Status Remote Port WWN / iSCSI Name (IP Address)
Error [B ] irq.2010-10.com (FE80::290:CCFF:FEA4:3A49)
Error [T ] irq.2010-11.com (2001:DB8::8:800:200C:417A)
Normal irq.2010-12.com (192.168.2.64)
Error [I C T S ] irq.2011-01.com
Normal irq.2010-12.com.fujitsu:storage-system.eternus-dx400:00040093405060808091
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
Line Speed Round Trip Multiplicity
(Mbit/s) Time (ms) Current / Recommended
- - -
10 20 4
10 Unknown 4
(192.168.2.65)
426
Priority Copy Schedule
Level Mode
- 3 Session
3 - Destination
3 - Session
P2X0-1030-09ENZ0