Fujitsu ETERNUS DX80 S2 Cli User's Manual page 280

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show host-affinity
-port-group-number
or
-port-group-name
-host-group-number
or
-host-group-name
■ Output
# CM#0 CA#0 Port#0
# Host
# No. Name
# 1 HBA1
A B
A: Host number
B: Host name
C: Affinity group number or LUN group number
D: Affinity group name or LUN group name
E: It shows whether or not the same volume identifier is defined between affinity groups.
If the same definitions exist, "Yes" is displayed in target affinity groups. Otherwise, "No" is displayed.
When a host affinity is set for the port group (Host Affinity Mode is enabled)
# Port Group
# No. Name
# 2 pg01
A B
# <Connection List>
# Port
#
# CM#0 CA#0 Port#0
# CM#0 CA#0 Port#1
H
A: Port group number
B: Port group name
C: Host group number
D: Host group name
E: Affinity group number or LUN group number
F: Affinity group name or LUN group name
G: It shows whether or not the same volume identifier is defined between affinity groups.
If the same definitions exist, "Yes" is displayed in target affinity groups. Otherwise, "No" is displayed.
G: Port number
H: Host number
K: Host name
Optional. This parameter specifies the port group identifiers to be narrowed down. One or
more parameters can be specified at the same time. For details, refer to
Syntax" (page 26). If omitted, this parameter is ignored.
Optional. This parameter specifies the host group identifiers to be narrowed down. One or
more parameters can be specified at the same time. For details, refer to
Syntax" (page 26). If omitted, this parameter is ignored.
Affinity/LUN Group Multi-Group
No. Name
4 AG004
C D
Host Group
No. Name
1 FCoE
C D
Host
No. Name
-
7 FCoE#2
I J
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
Volumes
No
E
Affinity/LUN Group
No. Name
1 ag2
E F
280
"1.2.15 Port Group
"1.2.16 Host Group
Multi-Group
Volumes
No
G
P2X0-1030-09ENZ0