Fujitsu ETERNUS DX80 S2 Cli User's Manual page 340

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show host-lu-qos
When the Port QoS settings are displayed with the target port specified
# Port
# CM#0 CA#1 Port#0
A
# <Event>
# No. Schedule No. Bandwidth Limit
# 1
# 3
C D
A: Host interface port
B: Performance limit value for the host interface port
C: Event number of the QoS schedule
D: QoS schedule number for the host interface port
E: Performance limit value of the QoS schedule for the host interface port
When the Host QoS settings are displayed
# Host
# No. Name
#1000 1234567890123456
A B
A: Host number
B: Host name
C: Performance limit value for the host
D: Host type
E: WWN (for FC/FCoE), iSCSI name (for iSCSI), or SAS address (for SAS) of the host
When the Host QoS settings are displayed with the target host specified
# Host
# No. Name
# 1000 1234567890123456
A B
# <Event>
# No. Schedule No. Bandwidth Limit
# 1
# 3
F G
A: Host number
B: Host name
C: Performance limit value for the host
D: Host type
E: WWN (for FC/FCoE), iSCSI name (for iSCSI), or SAS address (for SAS) of the host
F: Event number of the QoS schedule
G: QoS schedule number for the host
H: Performance limit value of the QoS schedule for the host
Bandwidth Limit
2
B
2 3
4 4
E
Bandwidth Limit Host Type WWN/iSCSI Name/SAS Address
C
Bandwidth Limit Host Type WWN/iSCSI Name/SAS Address
12 FC/FCoE
C D
2 3
4 14
H
340
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
12 FC/FCoE iqn.1991-05.com microsoft
D E
iqn.1991-05.com microsoft
E
P2X0-1030-09ENZ0