Show Raid-Tuning - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 5 Information Settings and Display
5.1 Performance > show raid-tuning

show raid-tuning

This command displays the performance tuning parameters of all the RAID groups.
■
Syntax
show raid-tuning
■ Parameter
No parameters.
■ Output
# RAID Group
# No. Name
# 1 RAIDGROUP001
A B
A: RAID group number
B: RAID group name
C: RAID level
D: RAID group status
E: DCMF (A multiplying factor which issues disk commands to disks)
F: Rebuild Priority
G: It shows whether Disk Tuning is enabled.
H: Ratio of command issues to disks
I: Interval for issuing the "Ordered Queue" command to disks
■
Example(s)
The following example displays the performance tuning parameters of all the RAID groups:
CLI> show raid-tuning
RAID Group
No. Name
1 RAIDGROUP001
2 RAIDGROUP002
3 RAIDGROUP003
4 RAIDGROUP004
RAID Status
Level
RAID1+0 Spare in Use
C D
RAID Status
Level
RAID1+0 Spare in Use
RAID5 Available
RAID5 Available
RAID5 SED Locked
619
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
DCMF Rebuild Disk Throttle
Priority Tuning
4 Low Enable
E F G H
DCMF Rebuild Disk Throttle
Priority Tuning
4 Low Enable
2 Middle Disable
2 High Disable
2 High Disable
Ordered
Cut
100% 65535
I
Ordered
Cut
80% 1024
- -
- -
- -
P2X0-1030-09ENZ0