Show Lu-Qos-Schedule - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show lu-qos-schedule

show lu-qos-schedule

This command shows the details of the QoS schedule.
■
Syntax
show lu-qos-schedule [-schedule-number
■ Parameter
-schedule-number
■ Output
# No. Type
# 0 Every-day
# 1 Every-week
# 2 Specific-day
# 512 Specific-day
# 2047 Specific-week Every-month last week Monday-Sunday
A B
A: QoS schedule number
B: QoS schedule event type
C: Explanation for the QoS schedule event type
D: Starting QoS schedule time
E: Ending QoS schedule time
■ Example(s)
The following example displays the QoS schedules:
CLI> show lu-qos-schedule
No. Type
0 Every-day
1 Every-week
2 Specific-day
512 Specific-day
2047 Specific-week Every-month last week Monday-Sunday
Optional. This parameter specifies the QoS schedule number to display details. One or more
QoS schedule numbers can be specified. If this parameter is omitted, all the QoS schedules are
displayed.
Details
Monday-Tuesday
1day(s) from Every-month 15
1day(s) from December 31
C
Details
Monday-Tuesday
1day(s) from Every-month 15
1day(s) from December 31
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
schedule-number
]
346
Time
from [18:10] to [12:20]
from [00:00] to [18:30]
from [00:40] to [18:30]
from [00:00] to [23:50]
from [00:00] to [06:00]
D E
Time
from [18:10] to [12:20]
from [00:00] to [18:30]
from [00:40] to [18:30]
from [00:00] to [23:50]
from [00:00] to [06:00]
P2X0-1030-09ENZ0