Show Eco-Raid-Group - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.3 RAID Group Management > show eco-raid-group

show eco-raid-group

This command displays a list of the ECO schedules that are associated with RAID groups.
■
Syntax
show eco-raid-group
■ Parameter
No parameters.
■ Output
# RAID Group
# No. Name
# 28 RGP028
A B
A: A RAID group number
B: A RAID group name
C: A RAID level
D: RAID group status
E: A Controller module to be assigned to a RAID group
F: RAID group capacity
G: An ECO schedule action, It means whether the ECO schedule is associated, or not
H: An ECO schedule number
(In the case of a schedule by a cooperative software, [128] is displayed.)
I: An ECO schedule name
(In the case of a schedule by a cooperative software, [External] is displayed.)
J: Current status of a Disk motor
K: Determent status by a control command
■ Example(s)
The following example displays a list of all the RAID groups that have an ECO schedule associated with them:
CLI> show eco-raid-group
RAID Group
No. Name
28 RGP028
29 RGP029
30 RGP030
31 RGP031
Level Status Assigned
CM
RAID1 Available CM#0
C D E
Level Status Assigned
CM
RAID1 Available CM#0
RAID1+0 Available CM#0
RAID5 Available CM#1
RAID0 Present CM#1
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
Capacity ECO Schedule
(MB) Action No. Name
53647 [ON ] 1 SC001
F G H I
Capacity ECO Schedule
(MB) Action No.Name
53647 [ON ] 1 SC001
60000 [ON ] 1 SC001
89654 [OFF] 128 External
22301 [OFF] 2 SC002
143
Motor Control
Status Status
Active [OFF]
J K
Motor Control
Status Status
Active [OFF]
Active [OFF]
Active [OFF]
Active [OFF]
P2X0-1030-09ENZ0