Show Ntp - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 4 Function/System Settings and Display
4.4 Miscellaneous > show ntp

show ntp

This command displays the NTP configuration.
■
Syntax
show ntp
■ Parameter
No parameters.
■ Output
CLI> show ntp
# NTP
# NTP Server
# NTP LAN Port
# Access Status [2008-02-21 08:30:00 succeeded SYNC]
■ Example(s)
The following example displays the NTP configuration:
CLI> show ntp
NTP
NTP Server
NTP LAN Port
Access Status [2008-02-21 08:30:00 succeeded SYNC]
CLI> show ntp
NTP
NTP Server
NTP LAN Port
Access Status [0000-00-00 00:00:00 failed SYNC]
CLI> show ntp
NTP
NTP Server
NTP LAN Port
Access Status [0000-00-00 00:00:00 succeeded SYNC]
[Enable]
It shows whether the NTP function is enabled, or not.
[ntpserver.com]
NTP Server name
[MNT]
Ethernet port to connect to NTP server
Result of synchronization
[Enable]
[10.1.1.100]
[RMT]
[Enable]
[fd80::abd0:223:ad]
[RMT]
[Disable]
[10.1.1.100]
[RMT]
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
560
P2X0-1030-09ENZ0