Fujitsu ETERNUS DX80 S2 Cli User's Manual page 335

Disk storage systems
Hide thumbs Also See for ETERNUS DX80 S2:
Table of Contents

Advertisement

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > set host-lu-qos
-bandwidth-limit
-host-type
-host-number
or
-host-name
-lu-qos-group
-event-number
Optional. This parameter specifies the performance limit value for Port QoS or Host QoS. Any
value between 0 (unlimited) and 15 (Max) can be specified. When multiple values are
specified, the number of values that are specified for this parameter must be the same as the
"-port" parameter or the "-host-number" parameter.
Port QoS
0
Unlimited
1
27,000 IOPS (1,000 MB/s)
2
21,000 IOPS (850 MB/s)
3
15,000 IOPS (700 MB/s)
4
10,020 IOPS (600 MB/s)
5
8,040 IOPS (500 MB/s)
6
6,000 IOPS (400 MB/s)
7
5,040 IOPS (300 MB/s)
8
4,020 IOPS (250 MB/s)
9
3,000 IOPS (200 MB/s)
10
2,040 IOPS (160 MB/s)
11
1,020 IOPS (125 MB/s)
12
720 IOPS (90 MB/s)
13
480 IOPS (60 MB/s)
14
240 IOPS (30 MB/s)
15
120 IOPS (15 MB/s)
This parameter specifies the type of host to set Host QoS for. The host can be specified by using
the "-host-number" or "-host-name" parameter.
fc
FC/FCoE
iscsi
iSCSI
sas
SAS
This parameter specifies which host to set Host QoS or LU QoS for. refer to
(page
23).
Optional. This parameter specifies the LU QoS Group number to set for LU QoS.
When multiple values are specified, the number of values that are specified for this parameter
must be the same as the "-port" parameter or the "-host-number" parameter. Specify two
double quotation marks ("") to restore the initial setting.
Optional. This parameter specifies the event number for the QoS schedule. A schedule number
is assigned to each event number. Any value between 1 to 7 can be specified. Multiple event
numbers can be specified. When multiple values are specified, the number of values that are
specified for this parameter must be the same as the "-port" parameter or the "-host-number"
parameter. If omitted, the default QoS schedule (event number 0) is set.
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
Host QoS
Unlimited
15,000 IOPS (800 MB/s)
12,600 IOPS (700 MB/s)
10,020 IOPS (600 MB/s)
7,500 IOPS (500 MB/s)
5,040 IOPS (400 MB/s)
3,000 IOPS (300 MB/s)
1,020 IOPS (200 MB/s)
780 IOPS (100 MB/s)
600 IOPS (70 MB/s)
420 IOPS (40 MB/s)
300 IOPS (25 MB/s)
240 IOPS (20 MB/s)
180 IOPS (15 MB/s)
120 IOPS (10 MB/s)
60 IOPS (5 MB/s)
335
"1.2.10 Host Syntax"
P2X0-1030-09ENZ0

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents