Stop Balancing-Thin-Pro-Volume - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.4 Volume Management > stop balancing-thin-pro-volume

stop balancing-thin-pro-volume

This command stops evenly relocating the TPVs among RAID groups. Specify the TPV that is being balanced.
■
Syntax
stop balancing-thin-pro-volume {-volume-number
■ Parameter
-volume-number
or
-volume-name
■ Example(s)
The following example stops balancing TPV01 and TPV02:
CLI> stop balancing-thin-pro-volume -volume-name TPV01,TPV02
This parameter specifies the TPV to stop balancing. One or more parameters can be specified at
the same time. For details, refer to
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
volume_numbers
| -volume-name
"1.2.9 Volume Syntax" (page
170
volume_names
}
22).
P2X0-1030-09ENZ0