Delete All-Volumes - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Disk storage systems
Hide thumbs Also See for ETERNUS DX80 S2:
Table of Contents

Advertisement

Chapter 3 Configuration Settings and Display
3.4 Volume Management > delete all-volumes

delete all-volumes

This command deletes all volumes from the specified RAID group and Thin provisioning pool, except for snap
data pool volumes. If the designated RAID group includes an expanded volume source, the expanded
destination is also deleted, if the designated RAID group includes an expanded volume destination, the
command fails with an error message. In this case, try again after deleting the expanded volume from the
source side. The Thin provisioning volume (tpv) cannot be deleted with the "-rg-number" or the "-rg-name"
parameters. For the Thin provisioning volume, the "-pool-number" or the "-pool-name" parameters are used.
The "delete all-flexible-tier-volumes" command is used to delete all of the Flexible Tier Volumes (FTVs) in a
Flexible Tier Pool (FTRP).
Syntax
delete all-volumes {-rg-number
{-pool-number
Parameter
-rg-number
or
-rg-name
-pool-number
or
-pool-name
Example(s)
The following example deletes all the volumes contained in the RAID group named "RGP001":
CLI> delete all-volumes -rg-name RGP001
The following example deletes all the volumes contained in the Thin provisioning pool named "TPP001":
CLI> delete all-volumes -pool-name TPP001
rg_number
pool_number
| -pool-name
This parameter specifies the RAID group identifiers to delete all the volumes contained in the
RAID groups. Only one RAID group can be specified at the same time. For details, refer to
Volume Syntax" (page
22).
This parameter cannot be specified with the "-pool-number" or the "-pool-name" parameter.
This parameter specifies the Thin provisioning pool identifiers to delete all the volumes
contained in the Thin provisioning pools. Only one Thin provisioning pool can be specified at
the same time. For details, refer to
This parameter cannot be specified with the "-rg-number" or the "-rg-name" parameter.
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
rg_name
| -rg-name
}
pool_name
}
"1.2.5 Thin Provisioning Pool Syntax" (page
152
"1.2.9
20).
P2X0-1030-09ENZ0

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents