Create Volume - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.4 Volume Management > create volume

create volume

This command creates volumes in the specified RAID group. When creating two or more volumes at a time,
they can be created in one RAID group based on the "-name" and the "-count" parameters. The created
volumes are formatted automatically.
The "create flexible-tier-volume" command is used to create Flexible Tier Volumes (FTVs).
Encryption-related functions may not be available for some user environments.
■ Syntax
create volume -name
{-pool-number
size
[-size { {tb|gb|mb}|max}| -virtual-size
[-copy-protection {enable | disable}] [-attention
[-wide-stripe-size {normal | small}] [-concatenation-order {auto | manual}]
[-volume-number
■ Parameter
-name
-rg-number
or
-rg-name
-pool-number
or
-pool-name
-type
name {-rg-number
pool_number
| -pool-name
volume_number
]
This parameter specifies a volume name. For details, refer to
20).
This parameter specifies a RAID group identifier to create new volumes. Note that multiple
RAID groups can be specified when "-type wsv" is set. For details, refer to
Syntax" (page 22). This parameter cannot be specified when the "-type tpv" parameter is
specified.
This parameter specifies a Thin provisioning pool identifier to create new volumes. For details,
refer to "1.2.5 Thin Provisioning Pool Syntax" (page
the "-type tpv" parameter is specified.
This parameter specifies the volume type.
open A Standard volume (OPEN) A created "open" type volume is displayed as a
"standard" volume.
standard A normal/open volume (Standard)
sdv A Snap Data Volume (SDV) for Advanced Copy functions
sdpv A Snap Data Pool Volume (SDPV) for Advanced Copy functions
tpv A Thin provisioning volume
wsv A Wide Striping Volume
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
rg_number | -rg-name rg_name
pool_name
} -type {open|standard|sdv|sdpv|tpv|wsv}
virtual_size
{tb|gb|mb}] [-count
attention
] [-encryption {enable|disable}]
20). This parameter can be specified when
145
}
count
]
"1.2.4 Alias Name Syntax" (page
"1.2.8 RAID Group
P2X0-1030-09ENZ0