Fujitsu ETERNUS DX80 S2 Cli User's Manual page 282

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show host-affinity
The following example displays all of the mappings that is set to host interface port CA#0 Port#1 on CM#0:
CLI> show host-affinity
CM#0 CA#0 Port#1 (Host Affinity Mode Enable)
Host
No. Name
1 HBA1
The following example only displays the mapping that is set to affinity group #4:
CLI> show host-affinity
CM#0 CA#0 Port#0 (Host Affinity Mode Enable)
Host
No. Name
1 HBA1
CM#0 CA#0 Port#1 (Host Affinity Mode Enable)
Host
No. Name
1 HBA1
The following example only displays the mapping that is set to the host named "HBA5":
CLI> show host-affinity
CM#1 CA#1 Port#1 (Host Affinity Mode Enable)
Host
No. Name
5 HBA5
The following is an example of multi-group volumes. This means the same volume identifier in the "AG001"
affinity group is defined in the "AG002" affinity group. In this case, "Yes" is displayed for both the "AG001"
and "AG002" affinity groups. In other affinity groups, "No" is displayed:
CLI> show host-affinity
CM#0 CA#0 Port#0 (Host Affinity Mode Enable)
Host
No. Name
1 HBA1
1 HBA2
1 HBA3
-port 001
Affinity/LUN Group Multi-Group
No. Name Volumes
4 AG004 No
-ag-number 4
Affinity/LUN Group Multi-Group
No. Name Volumes
4 AG004 No
Affinity/LUN Group Multi-Group
No. Name Volumes
4 AG004 No
-host-name HBA5
Affinity/LUN Group Multi-Group
No. Name Volumes
6 AG006 No
-port 000
Affinity/LUN Group Multi-Group
No. Name Volumes
1 AG001 Yes
2 AG002 Yes
3 AG003 No
282
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0