Fujitsu ETERNUS DX80 S2 Cli User's Manual page 504

Chapter 4 Function/System Settings and Display
4.3 Network Management > export enhanced-mib
-filename
■
Example(s)
The following example exports the enhanced MIB to the FTP server named "ftp.a.com". The FTP server login
is user "profile1", the stored location is "/temp", the default stored filename "/FJDARY-E100.MIB" is used, and
the Ethernet port that is used is the Maintenance port (MNT port).
CLI> export enhanced-mib -port maintenance -server ftp.a.com -user profile1 -dir /temp
Password :
exporting /temp/FJDARY-E100.MIB to ftp.a.com
Complete.
Optional. This parameter specifies the file name to store the MIB file. Since the directory name
cannot be specified within this string, use the "-dir" parameter to specify the directory name. If
this parameter is omitted, the default file name is "FJDARY-E100.MIB" for the ETERNUS DX80
S2/DX90, ETERNUS DX410 S2/DX440 S2, and ETERNUS DX8100 S2, and "FJDARY-E102.MIB" for
the ETERNUS DX8700 S2. If the file already exists, it is overwritten.
The following conversion specifications, which begin with a percent character, are replaced by
their corresponding value at the time of execution. If other conversion strings are specified,
this command terminates abnormally with an error message.
%s Serial number of the system
Example: MIB%s-mib.bin -> MIB123456789012-mib.bin
%d Current date
Example: MIB%d-mib.bin -> MIB20080819-mib.bin
%t Current time
Example: MIB%t-mib.bin -> MIB144855-mib.bin
%% Percent character
Example: mib%%.bin -> mib%.bin
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
504
P2X0-1030-09ENZ0