Show Migration - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.4 Volume Management > show migration

show migration

This command displays a list of the migrating volumes that are undergoing migration.
This command is also used for RAID Migration in which the destination is a Flexible Tier Pool (FTRP).
■ Syntax
show migration
■ Parameter
No parameters.
■
Output
# Migration Source Volume Migration Progress Error Work Volume
# No. Name
# 7 vol0007
A B
A: The move source volume number
B: The move source volume name
C: The volume migration status
D: The volume migration progress
E: The volume migration error code
F: Working volume number (In order to be used as a move destination)
■ Example(s)
The following example displays a list of all migrating volumes:
CLI> show migration
Migration Source Volume Migration Progress Error Work Volume
No. Name
- -
1 Volume-Number#01
2 Volume-Number#02
3 Volume-Number#03
Status Code
Active 50% 0x05
C D E
Status Code
Reserve - -
Error 20% 0x16
Suspend 10% 0x1c
Active 90% 0x00
168
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
No.
6
F
No.
-
5
6
4
P2X0-1030-09ENZ0