Set Sed-Key-Group - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 4 Function/System Settings and Display
4.4 Miscellaneous > set sed-key-group

set sed-key-group

This command modifies the key group.
■
Syntax
set sed-key-group [-name
[-security-level {low | high}] [-recovery-mode {auto | manual}] [-period {
[-master-server-id {
■ Parameter
-name
-machine-group-name
-security-level
-recovery-mode
-period
-master-server-id
name
] [-machine-group-name
master_server_id | ""}] [-slave-server-id {
Optional. This parameter specifies the key group name. 1 to 32 alphanumeric characters and
underscores (_) can be specified. Only an alphabetical character can be specified as the first
letter. If omitted, the existing setting is not changed.
Optional. This parameter specifies the machine group name. Set the same name as the device
group name in the key server. 1 to 16 alphanumeric characters and underscores (_) can be
specified. Only an alphabetical character can be specified as the first letter. If omitted, the
existing setting is not changed.
Optional. This parameter specifies the security level. If omitted, the existing setting is not
changed.
high Rebuild or maintenance cannot be performed when communication with the key
server is not available during a disk failure or disk maintenance work in a RAID
group that uses the key group.
low Rebuild or maintenance is performed using the common key when communica-
tion with the key server is not available during a disk failure or disk maintenance
work in a RAID group that uses the key group.
Optional. This parameter specifies whether to automatically perform recovery of a drive or a
RAID group that cannot be communicated with due to blockage of the key server when the
communication recovers. When "manual" is set, the recovery work is performed manually by
the user from Web GUI or CLI. If omitted, "auto" is set.
auto Automatic recovery is performed.
manual Automatic recovery is not performed.
Optional. This parameter specifies the valid period of the key. This period can be specified on a
monthly basis by using a number from 1 to 12. Specify consecutive double quotations ("") or
omit this parameter to not set this period. If omitted, the existing setting is not changed.
Optional. This parameter specifies the key server ID for the master server. 1 or 2 can be speci-
fied. When the master server is not used, specify consecutive double quotations (""). If omit-
ted, the existing setting is not changed. Use the same setting as the master server that is set
in the key server.
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
machine_group_name
slave_server_id
596
]
period
| ""}]
| ""}]
P2X0-1030-09ENZ0