Create Ssh-Server-Key - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 4 Function/System Settings and Display
4.3 Network Management > create ssh-server-key

create ssh-server-key

This command renews and registers an SSH (Secure Shell) server key. Once this command is executed,
connection via ssh is possible after five minutes have elapsed.
■ Syntax
create ssh-server-key [-key-length { 1024 | 2048 | 4096 }] [-version1 { enable|disable }]
■ Parameter
-key-length Optional. This parameter specifies the bit length of the generating SSH server key. Only one
-version1
■ Example(s)
The following example renews the SSH server key with a key length of 2048bits:
CLI> create ssh-server-key -key-length 2048 -version1 disable
value can be specified. If this parameter is omitted, 2048 (default value) is used for the key
length.
1024 Key length is 1024bits.
2048 Key length is 2048bits. (Default value)
4096 Key length is 4096bits.
Optional. This parameter specifies whether to enable connections using SSH Version 1. If this
parameter is omitted, it is handled as if "enable" is specified. If connection via SSH Version 1 is
disabled for this option, then only connection via SSH Version 2 is possible.
enable Connection via SSH Version 1 is enabled (default value).
disable Connection via SSH Version 1 is disabled.
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
533
P2X0-1030-09ENZ0