Initialize All-Users - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 4 Function/System Settings and Display
4.1 User Management > initialize all-users

initialize all-users

This command clears all of the existing user accounts. Note that only the initial default user is enabled.
■
Syntax
initialize all-users -execution {yes|no}
■ Parameter
-execution
■ Example(s)
The following example initializes all of the registered user accounts:
CLI> initialize all-users
This parameter specifies the execution mode. User accounts are initialized only when selecting
"yes".
yes All the user accounts are initialized.
no No operation.
-execution yes
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
368
P2X0-1030-09ENZ0