Fujitsu ETERNUS DX80 S2 Cli User's Manual page 647

Chapter 5 Information Settings and Display
5.3 Maintenance > export config-information
-data
-indicator
■ Example(s)
The following example exports the latest configuration information to the FTP server named "ftp.a.com"
using the Maintenance Ethernet port. The user name for the FTP server is "profile1" and the filename is "/
tmp/config.cfg":
CLI> export config-information -port maintenance -server ftp.a.com -user profile1 -filename /tmp/config.cfg
-data latest
Password : (Operator inputs password, but it is hidden.)
exporting /tmp/config.cfg to ftp.a.com
complete.
The following example is the same as above, except that the progress indicator is not displayed:
CLI> export config-information -port maintenance -server ftp.a.com -user profile1 -filename /tmp/config.cfg
-data latest
-indicator disable
Password :
This parameter specifies which configuration information will be exported.
latest This parameter specifies the latest configuration information in the system.
one-before This parameter specifies the second-latest configuration information in the
system.
two-before This parameter specifies the third-latest configuration information in the system.
Optional. This parameter specifies whether the progress indicator is displayed. If omitted, this
function is enabled.
enable Progress indicator is displayed.
disable Progress indicator is not displayed.
(Operator inputs password, but it is hidden.)
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
647
P2X0-1030-09ENZ0