Copy Lun-Group - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > copy lun-group

copy lun-group

This command copies information from one LUN group to another LUN group.
■
Syntax
copy lun-group -name
{-source-lg-number
■ Parameter
-name
-source-lg-number
or
-source-lg-name
■ Example(s)
The following example copies the definitions contained in the LUN group named "AG001", and creates a new
LUN group named "AG002" with those same definitions:
CLI> copy lun-group -name AG002 -source-lg-name AG001
name
source_lg_number
| -source-lg-name
This parameter specifies the LUN group name of the target LUN group. Only one name can be
specified at the same time.
This parameter specifies the LUN group identifier which is the source of the copy. Only one LUN
group can be specified at the same time. For details, refer to
(page 24).
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
source_lg_name
265
}
"1.2.11 Affinity Group Syntax"
P2X0-1030-09ENZ0