Delete Raid-Group - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.3 RAID Group Management > delete raid-group

delete raid-group

This command deletes an existing RAID group(s). A RAID group cannot be deleted if one or more volumes
exist in the RAID group.
• RAID groups cannot be deleted until the expansion process is complete.
• All volumes in a specified RAID group must be deleted before the RAID group is deleted.
■ Syntax
delete raid-group {-rg-number
■
Parameter
-rg-number
or
-rg-name
■
Example(s)
The following example deletes the RAID group named "R1":
CLI> delete raid-group -rg-name R1
The following example deletes consecutive RAID groups #1 - #8:
CLI> delete raid-group -rg-number 1-8
rg_numbers
This parameter specifies RAID group identifiers. One or more RAID group identifiers can be
specified. For details, refer to
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
rg_names
| -rg-name }
"1.2.8 RAID Group Syntax" (page
117
22).
P2X0-1030-09ENZ0