Show Volume-Progress - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.4 Volume Management > show volume-progress

show volume-progress

This command displays the progress of formatting, migration (RAID Migration), encryption, balancing, and
Zero Reclamation for volumes.
This command is also used to display the progress of Flexible Tier Volume (FTV) processes.
Encryption-related functions may not be available for some user environments.
■ Syntax
show volume-progress [ -volume-number
■ Parameter
-volume-number
or
-volume-name
■ Output
# show volume-progress -volume-number 1
#Volume
#No. Name
# 1 VOL001
A B
A: Volume number
B: An alias name of volume
C: Volume status
D: Progress status of formatting
E: Progress status of migrating
F: Progress status of encrypting
G: Progress status of balancing
H: Progress status of Zero Reclamation
■
Example(s)
The following example displays the progress status of volume #1:
CLI> show volume-progress -volume-number 1
Volume
No. Name
1 VOL001
Optional. This parameter specifies the volume identifiers. One or more parameters can be
specified at the same time. If the volume identifier is omitted, the progress status of all the
volumes is displayed. For details, refer to
Status Formatting
Progress
Available
C D
Status Formatting
Progress
Available
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
volume_numbers
| -volume-name
"1.2.9 Volume Syntax" (page
Migrating Encrypting
Progress Progress
100% - -
E F
Migrating Encrypting
Progress Progress
80% - -
158
volume_names
]
22).
Balancing Zero Reclamation
Progress Progress
-
G H
Balancing Zero Reclamation
Progress Progress
- -
P2X0-1030-09ENZ0
-