Fujitsu ETERNUS DX80 S2 Cli User's Manual page 211

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > set iscsi-parameters
-ipv6-gateway
-tcp-port
-tcp-window-scale
-congestion-control-option
-isns-server-ip
Optional. This parameter specifies the gateway server address in IPv6 format. The types of IP
addresses that can be specified are global addresses (including 6to4 addresses), link local
addresses, and unique local addresses. To delete an IP address that is already set, specify ALL0
(an IP address with all zero bits).
Example: -ipv6-gateway 10.1.0.250
Example: -ipv6-gateway 0::0
Example: -ipv6-gateway auto
auto The gateway IP address is automatically set in IPv6 format.
Optional. This parameter specifies TCP port number for iSCSI Target function. The default TCP
port number value is 3260.
0 – 28671 TCP port number
Optional. This parameter specifies the TCP window scale expansion.
This parameter cannot be specified for iSCSI-RA, which is only used for connecting older
models.
0 – 14 TCP Window scale
Note that expected performance may not be possible under a high
I/O load when "0" or "1" is specified. Even if "8" or more is specified for the value,
the operation is performed the same as when "7" is specified.
Optional. This parameter specifies whether to use the TCP congestion control option.
enable The TCP congestion control option enabled.
disable The TCP congestion control option disabled.
Optional. This parameter specifies the IP address of an iSNS server
notation (a base 256 "d.d.d.d" string) or IPv6 format. The types of IP addresses that can be
specified are global addresses (including 6to4 addresses), link local addresses, and unique
local addresses. IP addresses in IPv4 format can be specified when "enable" is specified for the
"-ipv4-flag" parameter. IP addresses in IPv6 format can be specified when "enable" is specified
for the "-ipv6-flag" parameter. The iSNS server must belong to the same iSCSI network as the
one to which the iSCSI interface port specified by the "-port" parameter belongs. If omitted, the
existing setting is not changed. This parameter cannot be specified when the port is set to the
RA mode.
*1: iSNS server: Internet Storage Name Server
Example: -isns-server-ip 10.1.1.12
Example: -isns-server-ip fe80::250
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
211
(*1)
using IPv4 standard
P2X0-1030-09ENZ0