Show Eco-Schedule - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.3 RAID Group Management > show eco-schedule

show eco-schedule

This command displays a summary of all of the ECO schedules, and ECO schedule events or detailed
information if one or more ECO schedules are specified.
■ Syntax
show eco-schedule [-schedule-number
■ Parameter
-schedule-number
or
-schedule-name
■ Output
# ECO Schedule
# No. Name
# 0 SC001
A B
# Event
# No. Type
# 1 Specific-week December 1st week Monday-Friday from [06:00] to [18:00]
C D
A: An ECO schedule number
B: An ECO schedule name
C: An ECO schedule event number
D: An ECO schedule event type
E: An explanation for the ECO schedule event type
F: A starting ECO schedule time
G: An ending ECO schedule time
■
Example(s)
The following example displays a list of all the registered ECO schedules:
CLI> show eco-schedule
ECO Schedule
No. Name
0 SC001
1 SC002
2 SC003_TEMP
schedule_numbers
Optional. This parameter specifies the ECO schedule identifier to display details. One or more
ECO schedule identifiers can be specified. If this parameter is omitted, all the ECO schedules
are displayed. For details, refer to
Details
E
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
| -schedule-name
"1.2.13 ECO Schedule Syntax" (page
Time
F G
138
schedule_names
]
25).
P2X0-1030-09ENZ0