Show Raid-Group-Progress - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.3 RAID Group Management > show raid-group-progress

show raid-group-progress

This command displays the progress of the Rebuild/Copy back process and the expansion process of all RAID
groups. Individual RAID groups can also be specified.
■ Syntax
show raid-group-progress [-rg-number
■ Parameter
-rg-number
or
-rg-name
■ Output
# RAID Group
# No. Name
# 0 RAIDGROUP001
# 1 RAIDGROUP012
A B
A: A RAID group number
B: A RAID group name
C: RAID group status
D: Progress status of Rebuild/Copyback
E: Progress status of expanding RAID groups (Logical Device Expansion)
■ Example(s)
The following example displays a progress list of all the RAID groups:
CLI> show raid-group-progress
RAID Group
No. Name
0 RAIDGROUP001
1 RAIDGROUP012
2 RAIDGROUP013
3 RAIDGROUP014
The following example displays only the progress status of the RAID group #1:
CLI> show raid-group-progress -rg-number 1
RAID Group
No. Name
1 RAIDGROUP012
rg_numbers
Optional. This parameter specifies RAID group identifiers. If the RAID group identifier is
omitted, a progress list of all the RAID groups is displayed. For details, refer to
Group Syntax" (page 22).
Status
Copyback
Available
C
Status
Copyback
Available
Available
SED Locked
Status
Available
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
rg_names
| -rg-name
Rebuild/Copyback
Progress
D
Rebuild/Copyback
Progress
Rebuild/Copyback
Progress
120
]
"1.2.8 RAID
Expanding
Progress
87% -
- 19%
E
Expanding
Progress
87% -
- 19%
87% -
0% -
Expanding
Progress
- 19%
P2X0-1030-09ENZ0