Fujitsu ETERNUS DX80 S2 Cli User's Manual page 629

Chapter 5 Information Settings and Display
5.3 Maintenance > hot expansion
6
Input the "hot expansion -type de" or the "hot expansion -type de
The steps involved in increasing the number of usable host interface ports are as follows:
Procedure
1
Use the "set host-port-license -key xxxxxxxxxxxxxxxx" command to register the host
interface port expansion license. The operand of the "-key" parameter is the license key.
2
Remove the covers of port#1 on CM#XDB#X.
3
Attach SFPs to port#1 on CM#XDB#X.
4
Use the "hot expansion -type host-port" command to define and incorporate the ports into
the system.
629
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
X
" command.
End of procedure
End of procedure
P2X0-1030-09ENZ0