Fujitsu ETERNUS DX80 S2 Cli User's Manual page 154

Chapter 3 Configuration Settings and Display
3.4 Volume Management > show volumes
-ftrp-number
or
-ftrp-name
-type
Optional. This parameter specifies the Flexible Tier Pool (FTRP) identifier. The details of the
volumes on a FTRP will be displayed. If omitted, a summary of all the volumes that exist in the
system is displayed. For details, refer to
• Only one parameter can be specified.
• Other parameters (except for "-mode default" and "-mode ftv") cannot be specified at the
same time.
Optional. This parameter specifies the volume type to display the specific type. If the volume
type is omitted, it is handled as selecting all types.
• Only one parameter can be specified.
• Other parameters (except for "-mode default") cannot be specified at the same time.
standard A normal/open volume (Standard)
sdv A Snap Data Volume (SDV) for Advanced Copy functions
sdpv A Snap Data Pool Volume (SDPV) for Advanced Copy functions
tpv A Thin Provisioning Volume (TPV)
ftv A Flexible Tier Volume (FTV)
wsv A Wide Striping Volume (WSV)
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
"1.2.6 Flexible Tier Pool Syntax" (page
154
21).
P2X0-1030-09ENZ0