Expand Flexible-Tier-Volume - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.4 Volume Management > expand flexible-tier-volume

expand flexible-tier-volume

This command expands the capacity of the Flexible Tier Volumes (FTVs) that are already registered in the
ETERNUS DX Disk storage system.
■ Syntax
expand flexible-tier-volume {-volume-number
-size size {tb|gb|mb}
■ Parameter
-volume-number
or
-volume-name
-size
■ Example(s)
The following example expands the FTV named "FTV0001" as a new 800GB area:
CLI > expand flexible-tier-volume -volume-name FTV0001 -size 800gb
This parameter specifies the volume number or the alias name of the FTVs for which the
capacity is to be expanded. For details, refer to
Optional. This parameter specifies the volume size after capacity expansion. Select whether
terabytes (TB), gigabytes (GB), or megabytes (MB) are used for the capacity.
Example: 1tb, 120gb, 512mb
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
volume_number
| -volume-name
"1.2.9 Volume Syntax" (page
181
volume_name
}
22).
P2X0-1030-09ENZ0