Set Sed-Key-Machine-Name - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 4 Function/System Settings and Display
4.4 Miscellaneous > set sed-key-machine-name

set sed-key-machine-name

This command specifies the key management machine name that is used as the machine name for
connecting to the key server.
The key management machine name corresponds to the machine ID in the key server.
■ Syntax
set sed-key-machine-name -machine-name {
■ Parameter
-machine-name
■ Example(s)
The following example sets a key management machine name:
CLI> set sed-key-machine-name -machine-name A0E2000000000_ET06F21AUABCPJ000000
This parameter specifies the key management machine name. Up to 48 alphanumeric charac-
ters and underscores (_) can be specified. Only an alphabetical character can be specified as
the first letter. Specify consecutive double quotations ("") to disable the specified key manage-
ment machine name.
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
machine_name | ""}
589
P2X0-1030-09ENZ0